|
|
|
National Stock Number:
5910-00-989-9194
Federal Supply Class:
5910
National Item Identification Number:
009899194
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 65F15AC154 | 01002 | GENERAL ELECTRIC CO CAPACITORS DIV | | 65F15AC154 | 56699 | BC COMPONENTS | | 711406-1 | 05869 | RAYTHEON COMPANY | | 719D1AF154PJ500AX | 56699 | BC COMPONENTS | | 6D500-154 | 58364 | BYCAP INC | | 69F15AC154 | 89954 | BAE SYSTEMS CONTROLS INC. | | ZPPA154J | 27556 | IMB ELECTRONIC PRODUCTS INC |
|
Techincal Specification:
| BODY HEIGHT | 0.205 INCHES MAXIMUM | | BODY LENGTH | 0.585 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.610 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 0.150 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.500 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|