| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SHAFT |
| ADJUSTMENT DEVICE ROTATION | 180.0 DEGREES MINIMUM COUNTERCLOCKWISE |
| ADJUSTMENT DEVICE TORQUE | 1.000 INCH-OUNCES MINIMUM AND 7.000 INCH-OUNCES MAXIMUM |
| BODY LENGTH | 8.190 INCHES NOMINAL |
| BODY STYLE | PLATE-MESHING |
| CAPACITANCE RANGE IN PICOFARADS | +0.0 TO 12.4 FIRST SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +0.0 TO 3.7 FOURTH SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +0.0 TO 2.3 THIRD SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +0.0 TO 21.5 SECOND SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +0.0 TO 4.5 FIFTH SECTION |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.093 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 7.146 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.937 INCHES NOMINAL |
| INDIVIDUAL SECTION QUANTITY | 5 |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 50000.0 MEGOHMS |
| MATERIAL | CERAMIC AND STEATITE INSULATION SUPPORTING |
| MATERIAL | METAL BASE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE(S) |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 65.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 2400.0 DC CONTINUOUS SECOND SECTION |
| NONDERATED VOLTAGE RATING AND TYPE | 3500.0 DC CONTINUOUS FIFTH SECTION |
| NONDERATED VOLTAGE RATING AND TYPE | 3500.0 DC CONTINUOUS FOURTH SECTION |
| NONDERATED VOLTAGE RATING AND TYPE | 3500.0 DC CONTINUOUS THIRD SECTION |
| NONDERATED VOLTAGE RATING AND TYPE | 600.0 DC CONTINUOUS FIRST SECTION |
| OVERALL HEIGHT | 2.531 INCHES NOMINAL |
| OVERALL LENGTH | 9.567 INCHES MAXIMUM |
| OVERALL WIDTH | 2.562 INCHES NOMINAL |
| PLATE AIR GAP | 0.050 INCHES |
| PRECIOUS MATERIAL AND LOCATION | STATOR PLATES AND ROTOR ASSEMBLY SILVER |
| PRECIOUS MATERIAL | SILVER |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 1.250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, HOLLOWED SINGLE SHAFT |
| SPLIT-STATOR ROTARY PLATE TYPE | BUTTERFLY |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 0.0 ALL SECTIONS |
| TERMINAL TYPE AND QUANTITY | 10 TAB, SOLDER LUG |
| THREAD CLASS | 2B |
| THREAD QUANTITY PER INCH | 32 |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -100.0 TO 100.0 ALL SECTIONS |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY ALL SECTIONS |