| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CASE MATERIAL | PLASTIC |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20/6A GOVERNMENT SPECIFICATION |
| TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| QUALITY FACTOR AT REFERENCE TEMP | 1000.0000 |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| BODY STYLE | W/O MTG FACILITIES, RADIAL TERMINALSW/O MTG FACILITIES, RADIAL TERMINALSW/O MTG FACILITIES, RADIAL TERMINALS |
| RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHEDNOT ESTABLISHED |
| BODY LENGTH | 0.687 INCHES NOMINAL |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -750.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -120.0/+120.0 SINGLE SECTION |
| INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHMS |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.125 INCHES MINIMUM1.125 INCHES MINIMUM1.125 INCHES MINIMUM |
| BODY DIAMETER | 0.225 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.375 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 68.000 PICOFARADS SINGLE SECTION |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1000.0 MEGOHMS |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL SURFACE TREATMENT | SOLDER |