5910-00-699-2770 CAPACITOR,FIXED,PAPER DIELECTRIC Index 5910-00-699-2772 CAPACITOR,FIXED,MICA DIELECTRIC

National Stock Number:
5910-00-699-2771

Federal Supply Class:
5910

National Item Identification Number:
006992771

Description:
CAPACITOR,FIXED,PAPER DIELECTRIC

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.


Manufacturer Information:
763167719204ARMY, UNITED STATES DEPARTMENT OF THE
CP55B4EF105L81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC2581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY HEIGHT1.250 INCHES NOMINAL
BODY LENGTH2.000 INCHES NOMINAL
BODY STYLEW/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY WIDTH2.000 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION1.000 MICROFARADS 1ST SECTION AND 1.000 MICROFARADS 2ND SECTION
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.0000
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.375 INCHES NOMINAL
FEATURES PROVIDEDHERMETICALLY SEALED CASE
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP20.0 MEGOHM-MICROFARADS
INSULATION RESISTANCE AT REFERENCE TEMP2000.0 MEGOHM-MICROFARADS
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED MOUNTING HOLES
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION600.0 DC 1ST SECTION AND 600.0 DC 2ND SECTION
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
RELIABILITY INDICATORNOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATORONE TERMINAL COMMON TO EACH SECTION
SECTION QUANTITY2
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
TERMINAL SURFACE TREATMENTSOLDER
TOLERANCE RANGE PER SECTION-15.00 TO 15.00 PERCENT 1ST SECTION AND -15.00 TO 15.00 PERCENT 2ND SECTION
UNTHREADED MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us