|
|
|
National Stock Number:
5910-00-269-2595
Federal Supply Class:
5910
National Item Identification Number:
002692595
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 05PL123FS | 12517 | COMPONENT RESEARCH CO INC | | 05PL123FSN | 12517 | COMPONENT RESEARCH CO INC | | D12B123FSW | 12517 | COMPONENT RESEARCH CO INC | | 247AS-C1097-014 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | F410A123S1 | 72928 | GULTON INDUSTRIES INC GUDEMAN DIV | | 917314-5 | 82577 | RAYTHEON COMPANY | | K323ZP.012UF50V1% | 00656 | AEROVOX CORP. | | X483-123-1-.50W4 | 84411 | AMERICAN SHIZUKI CORP | | HU-71-5 | 84411 | AMERICAN SHIZUKI CORP |
|
Techincal Specification:
| BODY DIAMETER | 0.190 INCHES NOMINAL | | BODY LENGTH | 0.592 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 12000.000 PICOFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 82577-917314-5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 SINGLE SECTION | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
|
|