|
|
|
National Stock Number:
5910-00-112-7167
Federal Supply Class:
5910
National Item Identification Number:
001127167
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 1127167 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 3330-316958395 | 80049 | DEPARTMENT OF THE AIR FORCE | | 55907 | 04655 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 480259PC45 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 3DA1-83 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | 84293PC1 | 99066 | AMBAC INDUSTRIES INC | | T9071259PC45 | 24446 | GENERAL ELECTRIC COMPANY | | MIL-C-25/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CP53B1EF105V | 81350 | JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | JANC25 | 81350 | JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N16C48841-9635 | 99993 | DEPARTMENT OF THE NAVY |
|
Techincal Specification:
| BODY HEIGHT | 1.000 INCHES NOMINAL | | BODY LENGTH | 2.000 INCHES NOMINAL | | BODY STYLE | W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 1.750 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 1.000 MICROFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.375 INCHES NOMINAL | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 20.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 2000.0 MEGOHM-MICROFARADS | | MOUNTING SLOT WIDTH | 0.375 INCHES NOMINAL | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 600.0 DC SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | UNTHREADED MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 81349-MIL-C-25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TOLERANCE RANGE PER SECTION | -10.00 TO 20.00 PERCENT SINGLE SECTION |
|
|