| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| BODY HEIGHT | 0.515 INCHES NOMINAL |
| BODY LENGTH | 0.500 INCHES NOMINAL |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| BODY WIDTH | 0.205 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| OVERALL HEIGHT | 0.687 INCHES NOMINAL |
| OVERALL LENGTH | 0.545 INCHES NOMINAL |
| OVERALL WIDTH | 0.205 INCHES NOMINAL |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL |
| MOUNTING METHOD | UNTHREADED HOLE(S) AND TERMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RESISTOR, VARIABLE, WIRE WOUND, NONPRECISIO |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.078 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-39015/2 GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| TEST DATA DOCUMENT | 81349-MIL-PRF-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |