|
|
|
National Stock Number:
5905-01-453-9639
Federal Supply Class:
5905
National Item Identification Number:
014539639
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 235434-1 | 37695 | RAYTHEON COMPANY | | 235434-1 | 3B150 | RAYTHEON COMPANY | | PRN111164702J | 54627 | HURST GRAPHICS INC | | 235434-1 | 54X10 | RAYTHEON COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 47.000 KILOHMS EACH RESISTOR | | IDENTICAL VALUE RESISTOR QUANTITY | 15 EACH RESISTOR | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 EACH RESISTOR | | POWER DISSIPATION RATING IN WATTS | 0.750 TOTAL NETWORK | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | INCLOSURE METHOD | ENCAPSULATED | | STYLE DESIGNATOR | FLAT PACK | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL QUANTITY | 16 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | BODY LENGTH | 0.150 INCHES MINIMUM AND | | 0.157 INCHES MAXIMUM | | BODY WIDTH | 0.189 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | BODY HEIGHT | 0.053 INCHES MINIMUM AND | | 0.069 INCHES MAXIMUM | | TERMINAL LENGTH | 0.016 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | TERMINAL WIDTH | 0.007 INCHES MINIMUM AND | | 0.010 INCHES MAXIMUM | | TEST DATA DOCUMENT | 37695-235434 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|