|
|
|
National Stock Number:
5905-01-424-8454
Federal Supply Class:
5905
National Item Identification Number:
014248454
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| MIL-PRF-94/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-94/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RV8NAYSL103A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE | | BODY DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | BODY LENGTH | 0.469 INCHES MINIMUM AND 0.593 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.134 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | MOUNTING METHOD | LOCKING BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.000 TO 10.000 SINGLE SECTION | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SECTION QUANTITY | 1 | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|