|
|
|
National Stock Number:
5905-01-413-5326
Federal Supply Class:
5905
National Item Identification Number:
014135326
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| C20582-1 | 81755 | LOCKHEED MARTIN CORPORATION | | GM020-2414 | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 KILOHMS LOWEST RESISTANCE VALUE | | 87.600 KILOHMS HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 7 LOWEST RESISTANCE VALUE | | 1 HIGHEST RESISTANCE VALUE | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 LOWEST RESISTANCE VALUE | | -0.100 TO 0.100 HIGHEST RESISTANCE VALUE | | POWER DISSIPATION RATING IN WATTS | 0.480 TOTAL NETWORK | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | INCLOSURE METHOD | ENCAPSULATED | | STYLE DESIGNATOR | FLAT PACK | | TERMINAL TYPE | PIN | | TERMINAL QUANTITY | 16 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | BODY LENGTH | 0.215 INCHES MINIMUM AND | | 0.225 INCHES MAXIMUM | | BODY WIDTH | 0.435 INCHES MINIMUM AND | | 0.445 INCHES MAXIMUM | | BODY HEIGHT | 0.090 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81755-C20582 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|