5930-01-389-6128 SWITCH,SENSITIVE Index 5999-01-389-6130 PANEL,RADIO FREQUENCY-ELECTROMAG

National Stock Number:
5905-01-389-6129

Federal Supply Class:
5905

National Item Identification Number:
013896129

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
702-033402111VISHAY SPRAGUE INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION305.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS ALL SECTIONS
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
BEARING TYPESLEEVE SHAFT
BODY DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
BODY LENGTH2.500 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
FEATURES PROVIDEDSWITCH
FIRST FLAT LENGTH0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
FLAT HEIGHT0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 ALL SECTIONS
LATERAL RUNOUT0.005 INCHES
MAXIMUM RUNNING TORQUE6.00 INCH-OUNCES
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE150.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 12 OCLOCK
NONTURN DEVICE RADIUS0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.002 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG305.0 NOMINAL
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
SCREW THREAD QUANTITY PER INCH32.0
SECTION QUANTITY2
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT RADIAL PLAY0.004 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND, FLATTED
SHAFT LENGTH0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
SWITCH TYPEPUSH-PULL
SWITCH VOLTAGE RATING IN VOLTS115.0
SWITCH CONTACT ARRANGEMENTSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
SWITCH CURRENT TYPE AND RATING IN AMPS0.150 AC
SWITCH OPERATING POSITIONANY POSITION OF ROTATION TRAVEL
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY9 WIRE LEAD


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us