|
|
|
National Stock Number:
5905-01-384-2635
Federal Supply Class:
5905
National Item Identification Number:
013842635
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 87016-C-3001FH | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 87016-C-3001FH | 57252 | VISHAY SPRAGUE, INC. | | 87016-C3001FH | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC | | 87016-C-3001FH | 57489 | VISHAY THIN FILM LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 3.000 KILOHMS EACH RESISTOR | | IDENTICAL VALUE RESISTOR QUANTITY | 19 EACH RESISTOR | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | POWER DISSIPATION RATING IN WATTS | 1.000 TOTAL NETWORK | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | INCLOSURE METHOD | UNINCLOSED | | STYLE DESIGNATOR | TERMINATION PAD EACH END | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | | TERMINAL QUANTITY | 20 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | BODY LENGTH | 0.342 INCHES MINIMUM AND | | 0.358 INCHES MAXIMUM | | BODY WIDTH | 0.342 INCHES MINIMUM AND | | 0.358 INCHES MAXIMUM | | BODY HEIGHT | 0.085 INCHES MAXIMUM | | TEST DATA DOCUMENT | 14933-87016 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|