|
|
|
National Stock Number:
5905-01-381-7844
Federal Supply Class:
5905
National Item Identification Number:
013817844
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 713-0501-020 | 13499 | ROCKWELL COLLINS, INC. | | 713-0501-020 | 64671 | SPECTRUM CONTROL, INC. | | R8-0025 | 58135 | ACRIAN INC | | A3RC08-2 | 64537 | CAES SYSTEMS LLC | | 713-0501-020 | 6P825 | VISHAY SPRAGUE, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 100.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.130 INCHES MAXIMUM | | BODY LENGTH | 0.792 INCHES MINIMUM AND 0.808 INCHES MAXIMUM | | BODY WIDTH | 0.222 INCHES MINIMUM AND 0.238 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.552 INCHES MINIMUM AND 0.568 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | MOUNTING HOLE SIZE | 0.122 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | POWER DISSIPATION RATING IN WATTS | 40.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | SPECIAL FEATURES | TWO TABS ONE EACH SIDE AND TWO MOUNTING HOLES ONE EACH END. | | STYLE DESIGNATOR | TERMINALS EACH END | | TERMINAL LENGTH | 0.150 INCHES MINIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.032 INCHES MINIMUM AND 0.048 INCHES MAXIMUM | | TEST DATA DOCUMENT | 13499-713-0501 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|