| ELECTRICAL RESISTANCE | 270.000 OHMS LOWEST RESISTANCE VALUE |
| 47.000 KILOHMS HIGHEST RESISTANCE VALUE |
| 3.300 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| 10.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| 1 HIGHEST RESISTANCE VALUE |
| 1 1ST INTERMEDIATE RESISTANCE VALUE |
| 1 2ND INTERMEDIATE RESISTANCE VALUE |
| RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR |
| POWER DISSIPATION RATING IN WATTS | 1.000 TOTAL NETWORK |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | SINGLE INLINE |
| TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE |
| TERMINAL QUANTITY | 6 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK |
| BODY LENGTH | 0.568 INCHES MINIMUM AND |
| 0.598 INCHES MAXIMUM |
| BODY WIDTH | 0.050 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| BODY HEIGHT | 0.332 INCHES MINIMUM AND |
| 0.350 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM AND |
| 0.150 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 49956-G225352 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIAL FEATURES | NO RESISTOR BETWEEN PINS 2 AND 3 |