5905-01-346-9538 RESISTOR,FIXED,WIRE WOUND Index 5306-01-346-9540 BOLT,EYE

National Stock Number:
5905-01-346-9539

Federal Supply Class:
5905

National Item Identification Number:
013469539

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
311-2323-0080009TEKTRONIX, INC.
CM4521512697CLAROSTAT SENSORS AND CONTROLS


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY HEIGHT0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
BODY LENGTH0.805 INCHES MINIMUM AND 0.815 INCHES MAXIMUM
BODY STYLERECTANGULAR BUSHING MOUNTED
BODY WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.210 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.120 INCHES NOMINAL
FEATURES PROVIDEDSWITCH
FIRST FLAT LENGTH0.093 INCHES NOMINAL
FLAT HEIGHT0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
III CUBIC MEASURE0.255 CUBIC INCHES
III FRAGILITY FACTORMODERATELY RUGGED
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM RUNNING TORQUE3.00 INCH-OUNCES
MAXIMUM STARTING TORQUE3.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG295.0 NOMINAL
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT BEARING TYPESLEEVE
SHAFT DIAMETER0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
SHAFT LENGTH0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM
SHAFT STYLEROUND, PARALLEL FLATTED
SWITCH OPERATING POSITIONANY POSITION OF ROTATION TRAVEL
SWITCH TYPEPUSH
SWITCH VOLTAGE RATING IN VOLTS30.0
SWITCH CONTACT ARRANGEMENTSINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
SWITCH CURRENT TYPE AND RATING IN AMPS0.250 DC
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY7 PIN
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION265.0 NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us