| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| BODY LENGTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.005 INCHES |
| MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 96.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| MOUNTING BUSHING LENGTH | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| MOUNTING METHOD | STANDARD BUSHING |
| PILOT DIAMETER RUNOUT | 0.002 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.003 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT LENGTH | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| TERMINAL LOCATION | UPPER ADJACENT SIDE TWO ROWS LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 57946-5030166 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |