|
|
|
National Stock Number:
5905-01-322-9454
Federal Supply Class:
5905
National Item Identification Number:
013229454
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 10548918 | 19200 | US ARMY ARDEC RDECOM | | ARH-50-13 | 91637 | VISHAY DALE ELECTRONICS, LLC | | ENH-50 0.825 OHM 1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | ENH-50-0.825OHMPORM1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 0.825 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY HEIGHT | 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | BODY LENGTH | 1.937 INCHES MINIMUM AND 1.999 INCHES MAXIMUM | | BODY WIDTH | 0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM | | CUBIC MEASURE | 0.820 CUBIC INCHES | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.558 INCHES MINIMUM AND 1.568 INCHES MAXIMUM | | INCLOSURE TYPE | ENCASED | | MOUNTING HOLE SIZE | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 | | RELIABILITY INDICATOR | ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL (S) | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TERMINAL LENGTH | 0.344 INCHES MINIMUM AND 0.468 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG |
|
|