|
|
|
National Stock Number:
5905-01-318-8689
Federal Supply Class:
5905
National Item Identification Number:
013188689
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 130058-1 | 16119 | GAMBLE CHARLES T INDUSTRIES | | 130058-1 | 91637 | VISHAY DALE ELECTRONICS, LLC | | L04239 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | LO4239 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 130058-1 | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 51.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 | | BODY LENGTH | 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM | | BODY WIDTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | ZZZY | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | MOUNTING HOLE SIZE | 0.126 INCHES NOMINAL | | POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO4239 | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 350.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TERMINAL LENGTH | 0.266 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.141 INCHES MAXIMUM |
|
|