|
|
|
National Stock Number:
5905-01-317-3021
Federal Supply Class:
5905
National Item Identification Number:
013173021
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 211H-20KA-40A-500R0K | 44655 | OHMITE HOLDING, L.L.C. | | 232B949P24 | 16119 | GAMBLE CHARLES T INDUSTRIES | | 232B949P24 | 2B632 | DETMER BUSINESS GROUP INC | | 232B949P24 | 89954 | BAE SYSTEMS CONTROLS INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 500.000 OHMS500.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 50.0 CELSIUS50.0 CELSIUS | | BODY DIAMETER | 0.687 INCHES MAXIMUM0.687 INCHES MAXIMUM | | BODY LENGTH | 1.968 INCHES MINIMUM AND 1.968 INCHES MINIMUM AND 2.031 INCHES MAXIMUM2.031 INCHES MAXIMUM | | CUBIC MEASURE | 0.741 CUBIC INCHES0.741 CUBIC INCHES | | FIXED TAP QUANTITY | 11 | | FIXED TAP TERMINAL TYPE | TAB W/SCREW | | INCLOSURE TYPE | UNINCLOSEDUNINCLOSED | | POWER DISSIPATION RATING IN WATTS | 20.000 FREE AIR20.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000-10.000 TO 10.000 | | SECTION NOMINAL RESISTANCE | 250.000 OHMS FIRST SECTION | | SPECIAL FEATURES | TEMPERATURE COEFFICIENT TO BE PLUS 1.7 PPM PER DEGREE CELSIUS | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | SUPPLEMENTARY FEATURES | CAUTION FOR SUBMARINE APPLICATION: TO PREVENT MERCURY CONTAMINATION TO COMPONENT,NO MERCURY INSTRUMENTS TO BE USED FOR ASSEMBLY OR TEST | | TERMINAL LENGTH | 0.625 INCHES MINIMUM AND 0.625 INCHES MINIMUM AND 0.781 INCHES MAXIMUM0.781 INCHES MAXIMUM | | TERMINAL TYPE | TAB W/SCREW | | TERMINAL WIDTH | 0.250 INCHES MINIMUM AND 0.250 INCHES MINIMUM AND 0.313 INCHES MAXIMUM0.313 INCHES MAXIMUM |
|
|