| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 1.03 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | BRAKE |
| ACTUATOR TYPE | SINGLE SHAFT |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| BODY LENGTH | 0.821 INCHES MINIMUM AND 0.841 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CUBIC MEASURE | 2.805 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.003 INCHES |
| MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING(S) AND THREADED HOLE(S) |
| PILOT DIAMETER RUNOUT | 0.002 INCHES |
| PILOT DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| UNDERCUT DIAMETER | 1.812 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| SPECIFICATION/STANDARD DATA | 32255-41642 MANUFACTURERS SPECIFICATION CONTROL |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL TYPE AND QUANTITY | 3 TURRET |