5905-01-306-2781, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-306-2780 RESISTOR,FIXED,WIRE WOUND

National Stock Number:
5905-01-306-2781

Federal Supply Class:
5905

National Item Identification Number:
013062781

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

04ER010-1	24587	RAYTHEON CO ESD LONG ISLAND DIV
1240P-200R-5PCT	18612	VISHAY INTERTECHNOLOGY, INC.

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	6840.0 MINIMUM AND 8280.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	200.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
BODY LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
BODY STYLE	RECTANGULAR
BODY WIDTH	0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CUBIC MEASURE	0.013 CUBIC INCHES
FEATURES PROVIDED	HUMIDITY PROOF
FRAGILITY FACTOR	MODERATELY RUGGED
MAXIMUM RUNNING TORQUE	3.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	3.00 INCH-OUNCES
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.25 FREE AIR SINGLE SECTION
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACES GOLD
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	6840.0 MINIMUM AND 8280.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.070 INCHES NOMINAL
SHAFT LENGTH	0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-10.0 TO 10.0 SINGLE SECTION
TERMINAL LENGTH	0.200 INCHES MINIMUM
TERMINAL LOCATION	LEFT ADJACENT SIDE TWO ROWS
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	24587-04ER010 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial