5905-01-279-4830, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-279-4829 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5905-01-279-4830

Federal Supply Class:
5905

National Item Identification Number:
012794830

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

D6001513-1	12697	CLAROSTAT SENSORS AND CONTROLS
D6001513-1	57045	DEPARTMENT OF THE ARMY US ARMY AVIONICS RESEARCH AND DEVELOPMENT ACTIVITY
D6001513-1	78711	TELEPHONICS CORP

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	245.0 MINIMUM AND 255.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
BODY LENGTH	0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
BODY STYLE	RECTANGULAR BUSHING MOUNTED
BODY WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
CUBIC MEASURE	0.130 CUBIC INCHES
FEATURES PROVIDED	HUMIDITY PROOF AND SHAFT SEAL
FIRST FLAT LENGTH	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
FLAT HEIGHT	0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM
FRAGILITY FACTOR	MODERATELY RUGGED
MAXIMUM RUNNING TORQUE	3.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	3.00 INCH-OUNCES
MAXIMUM STOP TORQUE	48.00 INCH-OUNCES
MOUNTING BUSHING LENGTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
MOUNTING METHOD	STANDARD BUSHING AND TAB
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 300.0 MAXIMUM
SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
SCREW THREAD SERIES DESIGNATOR	UNEF
SECTION QUANTITY	1
SHAFT BEARING TYPE	SLEEVE
SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT LENGTH	0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
SHAFT STYLE	ROUND, FLATTED
TERMINAL LENGTH	0.250 INCHES MINIMUM
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	57045-D6001513-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial