5905-01-277-7046, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-277-7045 RESISTOR,FIXED,WIRE WOUND

5905-01-277-7047 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5905-01-277-7046

Federal Supply Class:
5905

National Item Identification Number:
012777046

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

152-4	0T1F7	ANRITSU COMPANY
152-4	12697	CLAROSTAT SENSORS AND CONTROLS
388SX-10K	12697	CLAROSTAT SENSORS AND CONTROLS
152-4	20944	WILTRON CO

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	265.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
BODY HEIGHT	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
BODY LENGTH	0.969 INCHES MINIMUM AND 0.999 INCHES MAXIMUM
BODY STYLE	RECTANGULAR BUSHING MOUNTED
BODY WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
CUBIC MEASURE	0.265 CUBIC INCHES
FEATURES PROVIDED	SWITCH
FIRST FLAT LENGTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
FLAT HEIGHT	0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
OPERATING POSITION	ANY POSITION OF ROTATIONAL TRAVEL
MAXIMUM RUNNING TORQUE	4.50 INCH-OUNCES
MAXIMUM STARTING TORQUE	4.50 INCH-OUNCES
MAXIMUM STOP TORQUE	48.00 INCH-OUNCES
MOUNTING BUSHING LENGTH	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
MOUNTING METHOD	STANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	295.0 NOMINAL
SCREW THREAD SERIES DESIGNATOR	UNEF
SCREW THREAD DIAMETER	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
SCREW THREAD QUANTITY PER INCH	32.0
SECTION QUANTITY	1
SHAFT BEARING TYPE	SLEEVE
SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT STYLE	ROUND, FLATTED
SHAFT LENGTH	0.703 INCHES MINIMUM AND 0.735 INCHES MAXIMUM
SWITCH CONTACT ARRANGEMENT	DOUBLE POLE, SINGLE THROW, NORMALLY OPEN
SWITCH CURRENT TYPE AND RATING IN AMPS	0.250 DC
SWITCH TYPE	PUSH
SWITCH VOLTAGE RATING IN VOLTS	30.0
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	7 PIN

Click here to Register for Free 30-day Trial