5905-01-276-1117 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5910-01-276-1119 CAPACITOR,FIXED,PAPER DIELECTRIC

National Stock Number:
5905-01-276-1118

Federal Supply Class:
5905

National Item Identification Number:
012761118

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
5SE01338-102111VISHAY SPRAGUE INC
5SE01338-128638NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 1.3.1 BLDG 562-1
860-040002111VISHAY SPRAGUE INC
5SE01338-180020NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM AND 3604.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION2.5 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
BEARING TYPESLEEVE SHAFT
BODY DIAMETER1.812 INCHES NOMINAL
BODY LENGTH1.750 INCHES NOMINAL
BODY STYLECYLINDRICAL BUSHING MOUNTED
CUBIC MEASURE4.513 CUBIC INCHES
FEATURES PROVIDEDHUMIDITY PROOF
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 SINGLE SECTION
MAXIMUM RUNNING TORQUE2.00 INCH-OUNCES
MAXIMUM STARTING TORQUE2.00 INCH-OUNCES
MAXIMUM STOP TORQUE550.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.312 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL
NONTURN DEVICE LOCATIONAT 12 OCLOCK
POWER DISSIPATION RATING PER SECTION IN WATTS5.0 FREE AIR SINGLE SECTION
PRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
PRECIOUS MATERIALGOLD
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM AND 3604.0 MAXIMUM
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SECTION QUANTITY1
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
SHAFT RADIAL PLAY0.0025 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.812 INCHES NOMINAL
SPECIFICATION/STANDARD DATA28638-5SE01338 MANUFACTURERS SOURCE CONTROL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS2300.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-3.0 TO 3.0 OHMS SINGLE SECTION
TERMINAL LOCATIONLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us