|
|
|
National Stock Number:
5905-01-252-5742
Federal Supply Class:
5905
National Item Identification Number:
012525742
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 010081-29 | 94271 | LOCKHEED MARTIN CORP | | L03679 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | RX1-11105F | 63060 | HEICO OHMITE LLC DBA OHMITE MFG CO INC | | RX1-1116F | 63060 | HEICO OHMITE LLC DBA OHMITE MFG CO INC | | M51-11105F | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 111.000 MEGOHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | BODY DIAMETER | 0.220 INCHES NOMINAL | | BODY LENGTH | 1.880 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | CUBIC MEASURE | 0.071 CUBIC INCHES | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L03679; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1500.0 TO 0.0 | | TERMINAL LENGTH | 1.500 INCHES NOMINAL | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 14933-L03679 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 5.0 GRAMS |
|
|