| ELECTRICAL RESISTANCE | 230.000 KILOHMS THIRD INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 150.000 KILOHMS SECOND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 5.000 KILOHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 500.000 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 33.000 KILOHMS FIRST INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY HEIGHT | 0.170 INCHES MAXIMUM |
| BODY LENGTH | 1.000 INCHES NOMINAL |
| BODY WIDTH | 0.290 INCHES MAXIMUM |
| CUBIC MEASURE | 0.036 CUBIC INCHES |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 FIRST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 SECOND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 THIRD INTERMEDIATE RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 1.000 TOTAL NETWORK LOCATION NOT OTHERWISE SPECIFIED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR |
| SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK |
| STYLE DESIGNATOR | SINGLE INLINE |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 LOCATION NOT OTHERWISE SPECIFIED |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 LOCATION NOT OTHERWISE SPECIFIED |
| TERMINAL LENGTH | 0.125 INCHES NOMINAL |
| TERMINAL QUANTITY | 10 |
| TERMINAL WIDTH | 0.020 INCHES NOMINAL |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 82577-655794 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |