|
|
|
National Stock Number:
5905-01-249-7002
Federal Supply Class:
5905
National Item Identification Number:
012497002
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| GR815EC64R9F | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PH-25A 64.9 OHMS 1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | PH25A-64.9OHMSPORM1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | PH25A64.9 0HMS,P | 91637 | VISHAY DALE ELECTRONICS, LLC | | PH25A64.9-1% | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 64.900 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 0.812 INCHES NOMINAL | | CUBIC MEASURE | 0.800 CUBIC INCHES | | INCLOSURE TYPE | ENCASED | | MOUNTING BUSHING DIAMETER | 0.625 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.546 INCHES MAXIMUM | | POWER DISSIPATION RATING IN WATTS | 12.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINALS ONE END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 | | TERMINAL LENGTH | 0.438 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.125 INCHES NOMINAL | | TEST DATA DOCUMENT | 26512-GR815EC DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 22.0 GRAMS |
|
|