|
|
|
National Stock Number:
5905-01-248-9595
Federal Supply Class:
5905
National Item Identification Number:
012489595
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 7567009-002 | 13160 | GENERAL DYNAMICS LAND SYSTEMS INC. | | 7900AE-06-4701-F | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 4.700 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.078 INCHES MAXIMUM | | BODY LENGTH | 0.350 INCHES NOMINAL | | BODY WIDTH | 0.350 INCHES NOMINAL | | CUBIC MEASURE | 0.010 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 19 EACH RESISTOR | | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.500 TOTAL NETWORK | | PROPRIETARY CHARACTERISTICS | PACS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | STYLE DESIGNATOR | FLAT PACK | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TERMINAL LENGTH | 0.040 INCHES NOMINAL | | TERMINAL QUANTITY | 20 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.030 INCHES NOMINAL | | TEST DATA DOCUMENT | 13160-7567009 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|