|
|
|
National Stock Number:
5905-01-248-1721
Federal Supply Class:
5905
National Item Identification Number:
012481721
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| PC70107-8 | 09344 | ROCKWELL COLLINS, INC. DBA RC DISPLAYS SYSTEMS | | PC70107-8 | 13499 | ROCKWELL COLLINS, INC. | | PC70107-8 | 18612 | VISHAY INTERTECHNOLOGY, INC. | | PC70107-8 | 84T51 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY HEIGHT | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | BODY LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR | | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM | | SHAFT DIAMETER | 0.075 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | REAR END LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.200 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|