5935-01-227-0905 CLAMP,CABLE,ELECTRICAL CONNECTOR Index 6220-01-227-0907 LENS,LIGHT

National Stock Number:
5905-01-227-0906

Federal Supply Class:
5905

National Item Identification Number:
012270906

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
S-1849-A-197150406ARGON ST, INC.


Techincal Specification:
SECTION QUANTITY2
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION AND
13.7 KILOHMS 2ND SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 ALL SECTIONS
FUNCTION CONFORMITY PER SECTIONALL SECTIONS TERMINAL BASE LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 ALL SECTIONS
SHAFT RUNOUT0.002 INCHES
SHAFT BEARING TYPEBEARING
MAXIMUM STARTING TORQUE2.75 INCH-OUNCES
MAXIMUM RUNNING TORQUE1.60 INCH-OUNCES
POWER DISSIPATION RATING PER SECTION IN WATTS6.0 FREE AIR ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT DIAMETER2.8740 INCHES MINIMUM AND
2.8750 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND
0.0670 INCHES MAXIMUM
UNDERCUT DIAMETER2.995 INCHES MINIMUM AND
3.005 INCHES MAXIMUM
UNDERCUT WIDTH0.0730 INCHES MINIMUM
BODY DIAMETER2.995 INCHES MINIMUM AND
3.005 INCHES MAXIMUM
BODY LENGTH1.292 INCHES MAXIMUM
MOUNTING LIP DIAMETER2.9950 INCHES MINIMUM AND
3.0050 INCHES MAXIMUM
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND
0.0980 INCHES MAXIMUM
ANGLE OF MOUNTING HOLE IN DEG60.0
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
MOUNTING HOLE/STUD CIRCLE DIAMETER1.745 INCHES MINIMUM AND
1.755 INCHES MAXIMUM
ACTUATOR TYPESINGLE SHAFT
SHAFT STYLEROUND, SLOTTED
SHAFT DIAMETER0.2494 INCHES MINIMUM AND
0.2497 INCHES MAXIMUM
SHAFT LENGTH0.485 INCHES MINIMUM AND
0.515 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG250.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURESTOPS
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION250.0 NOMINAL
MOUNTING METHODTHREADED HOLE
MOUNTING FACILITY QUANTITY3
SCREW THREAD SERIES DESIGNATORUNC
SCREW THREAD DIAMETER0.164 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
TERMINAL TYPE AND QUANTITY6 TURRET
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATORNOT ESTABLISHED
FRAGILITY FACTORMODERATELY RUGGED


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us