5905-01-213-0285 RESISTOR NETWORK,FIXED,FILM Index 5930-01-213-0287 BOOT,DUST AND MOISTURE SEAL

National Stock Number:
5905-01-213-0286

Federal Supply Class:
5905

National Item Identification Number:
012130286

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
127135A45152OSHKOSH CORP
127135A75Q65OSHKOSH DEFENSE LLC
RGS10R44655OHMITE HOLDING, L.L.C.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION299.5 MINIMUM AND 305.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION10.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER340.0 SINGLE SECTION
BODY DIAMETER2.745 INCHES MINIMUM AND 2.755 INCHES MAXIMUM
BODY LENGTH1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
FEATURES PROVIDEDHUMIDITY PROOF
FIRST FLAT LENGTH0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
FLAT HEIGHT0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM
III CUBIC MEASURE10.394 CUBIC INCHES
III FRAGILITY FACTORMODERATELY RUGGED
POWER DISSIPATION RATING PER SECTION IN WATTS75.0 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM RUNNING TORQUE32.00 INCH-OUNCES
MAXIMUM STARTING TORQUE32.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 6 OCLOCK
NONTURN DEVICE RADIUS0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG295.0 MINIMUM AND 300.5 MAXIMUM
SCREW THREAD DIAMETER0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT BEARING TYPESLEEVE
SHAFT DIAMETER0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
SHAFT LENGTH0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
SHAFT STYLEROUND, FLATTED
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us