5905-01-212-5435, RESISTOR,VARIABLE,WIRE WOUND,PRE

5905-01-212-5436 RESISTORNETWORK,FIXED,FILM

National Stock Number:
5905-01-212-5435

Federal Supply Class:
5905

National Item Identification Number:
012125435

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.

Manufacturer Information:

ED741501-501	17826	TECHNO COMPONENTS CORP DBA TECHNO COMPONENTS
ED741501-501	32997	BOURNS INC
ED741501-501	73030	HAMILTON SUNDSTRAND CORPORATION
ED741501-501	84048	VERNITRON CORP VRN INTERNATIONAL DIV
ED741501-501	94271	LOCKHEED MARTIN CORP

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	5400.0 MINIMUM AND 10800.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
BODY LENGTH	0.420 INCHES MAXIMUM
BODY STYLE	RECTANGULAR
BODY WIDTH	0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
CUBIC MEASURE	0.039 CUBIC INCHES
FEATURES PROVIDED	HUMIDITY PROOF
FRAGILITY FACTOR	MODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION	-1.000 TO 1.000 SINGLE SECTION
MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	5400.0 MINIMUM AND 10800.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
SHAFT LENGTH	0.080 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATION	REAR END LOCATION NOT OTHERWISE SPECIFIED
TERMINAL LENGTH	0.172 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	73030-ED741501 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial