5905-01-209-2740 RESISTOR,FIXED,FILM Index 5905-01-209-2742 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-209-2741

Federal Supply Class:
5905

National Item Identification Number:
012092741

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
10085-214212697CLAROSTAT SENSORS AND CONTROLS
10085-214214304L3HARRIS TECHNOLOGIES, INC.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION315.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY HEIGHT0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
BODY LENGTH0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
BODY STYLERECTANGULAR BUSHING MOUNTED
BODY WIDTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
FEATURES PROVIDEDHUMIDITY PROOF
FIRST FLAT LENGTH0.500 INCHES MINIMUM
FLAT HEIGHT0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
III CUBIC MEASURE0.128 CUBIC INCHES
III FRAGILITY FACTORMODERATELY RUGGED
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MOUNTING BUSHING LENGTH0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.250 INCHES MINIMUM
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG315.0 MINIMUM
SCREW THREAD DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT BEARING TYPESLEEVE
SHAFT DIAMETER0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
SHAFT LENGTH0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
SHAFT STYLEROUND, FLATTED
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us