5905-01-199-4189 RESISTOR,FIXED,WIRE WOUND Index 5915-01-199-4191 NETWORK,CIRCUIT PROTECTION

National Stock Number:
5905-01-199-4190

Federal Supply Class:
5905

National Item Identification Number:
011994190

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
116WS19308815HONEYWELL INTERNATIONAL INC
1300-84357057NAVCOM DEFENSE ELECTRONICS, INC.
8872400001-102111VISHAY SPRAGUE INC
8872400001-157057NAVCOM DEFENSE ELECTRONICS, INC.


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION2.5 KILOHMS ALL SECTIONS
ACTUATOR TYPEDOUBLE ENDED SHAFT
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER135.0 ALL SECTIONS
BEARING TYPEBEARING SHAFT
BODY DIAMETER1.047 INCHES MINIMUM AND 1.062 INCHES MAXIMUM
BODY LENGTH1.165 INCHES MINIMUM AND 1.180 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 ALL SECTIONS
OVERALL DIAMETER1.047 INCHES MINIMUM AND 1.062 INCHES MAXIMUM
OVERALL LENGTH2.002 INCHES MINIMUM AND 2.092 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES
MAXIMUM STARTING TORQUE0.30 INCH-OUNCES
MOUNTING LIP DEPTH0.0370 INCHES MINIMUM AND 0.0770 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.0470 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM
PILOT LENGTH0.0370 INCHES MINIMUM AND 0.0770 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY2
SHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT STYLEROUND
SHAFT LENGTH0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
SPECIAL FEATURESONE RESISTOR VARIABLE ON EACH SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY8 TURRET
UNDERCUT DIAMETER0.960 INCHES MINIMUM AND 0.975 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us