|
|
|
National Stock Number:
5905-01-195-5795
Federal Supply Class:
5905
National Item Identification Number:
011955795
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 228115-7 | 37695 | RAYTHEON COMPANY | | CM43842-7 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | CM43842-7 | 50516 | CLAROSTAT-RICHMOND INC SUB OF CLAROSTAT MFG CO INC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | TERMINAL LOCATION | REAR-BOTTOM | | MAXIMUM STOP TORQUE | 56.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 21.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -5.0 TO 5.0 -55 DEG CELSIUS SINGLE SECTION AND | | -1.5 TO 1.5 0 DEG CELSIUS SINGLE SECTION AND | | -1.5 TO 1.5 85 DEG CELSIUS SINGLE SECTION AND | | -2.5 TO 2.5 105 DEG CELSIUS SINGLE SECTION AND | | -3.5 TO 3.5 120 DEG CELSIUS SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | OPERATING POSITION | START OF ROTATION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.625 INCHES NOMINAL | | BODY LENGTH | 0.641 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.200 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.530 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 325.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 270.0 NOMINAL | | NONTURN DEVICE RADIUS | 0.313 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | PANEL SEAL AND | | SWITCH | | SWITCH TYPE | ROTARY | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 DC | | SWITCH VOLTAGE RATING IN VOLTS | 28.0 | | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 37695-228115 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|