5905-01-194-9173 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-01-194-9175 RESISTOR,VARIABLE,NONWIREWOUND,

National Stock Number:
5905-01-194-9174

Federal Supply Class:
5905

National Item Identification Number:
011949174

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
116FL1-33308815HONEYWELL INTERNATIONAL INC
5E4785/08-000173030HAMILTON SUNDSTRAND CORPORATION


Techincal Specification:
SECTION QUANTITY1
ELECTRICAL RESISTANCE PER SECTION20.000 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 SINGLE SECTION
SHAFT RUNOUT0.001 INCHES
LATERAL RUNOUT0.001 INCHES
PILOT DIAMETER RUNOUT0.00100 INCHES
SHAFT RADIAL PLAY0.001 INCHES
SHAFT BEARING TYPEBEARING
SHAFT END PLAY0.00100 INCHES
MAXIMUM STARTING TORQUE0.66 INCH-OUNCES
MAXIMUM RUNNING TORQUE0.66 INCH-OUNCES
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0 TO 400.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER80.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS10120.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-10.0 TO 10.0 OHMS SINGLE SECTION
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT DIAMETER0.9683 INCHES MINIMUM AND
0.9688 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
UNDERCUT DIAMETER0.975 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM
BODY DIAMETER1.073 INCHES MAXIMUM
BODY LENGTH0.830 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.0620 INCHES NOMINAL
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
ACTUATOR TYPEDOUBLE ENDED SHAFT
SHAFT STYLEROUND
SHAFT DIAMETER0.1244 INCHES MINIMUM AND
0.1247 INCHES MAXIMUM
SHAFT LENGTH0.594 INCHES MINIMUM AND
0.656 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION340.0 NOMINAL
MOUNTING METHODCLAMP RING
TERMINAL TYPE AND QUANTITY4 TURRET
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATORNOT ESTABLISHED
SPECIAL FEATURESBURN IN REQUIRED
TEST DATA DOCUMENT73030-5E4785/08 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
FRAGILITY FACTORMODERATELY DELICATE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us