|
|
|
National Stock Number:
5905-01-185-5923
Federal Supply Class:
5905
National Item Identification Number:
011855923
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5E4780/03-1017 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | BODY WIDTH | 0.142 INCHES MINIMUM AND 0.222 INCHES MAXIMUM | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | MOUNTING METHOD | TERMINAL | | BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | TEST DATA DOCUMENT | 73030-5E4780/03 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | SECTION QUANTITY | 1 | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | TERMINAL LENGTH | 0.300 INCHES MINIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | TERMINAL TYPE AND QUANTITY | 3 PIN | | BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | RELIABILITY INDICATOR | NOT ESTABLISHED | | III CUBIC MEASURE | 0.034 CUBIC INCHES | | SHAFT LENGTH | 0.080 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
|
|