|
|
|
National Stock Number:
5905-01-185-0551
Federal Supply Class:
5905
National Item Identification Number:
011850551
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 460240-1481 | 07690 | BAE SYSTEMS CONTROLS INC | | R-4C-6B1002HB | 14298 | INSILCO CORP ACIC DIV | | R-4C-6B1002HB | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.332 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | BODY LENGTH | 0.583 INCHES MAXIMUM | | BODY WIDTH | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | CUBIC MEASURE | 0.020 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 3 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.300 TOTAL NETWORK LOCATION NOT OTHERWISE SPECIFIED | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 LOCATION NOT OTHERWISE SPECIFIED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | TERMINAL QUANTITY | 6 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 07690-460240 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|