|
|
|
National Stock Number:
5905-01-184-3509
Federal Supply Class:
5905
National Item Identification Number:
011843509
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 144-558-0 | 73138 | BI TECHNOLOGIES CORPORATION | | 6086560-2 | 03640 | LOCKHEED MARTIN CORPORATION | | HC8003-2 | 34707 | SATCON ELECTRONICS INC DBA USE CAGE CODE 33256 FOR CATALOGING | | 6086560-2 | 52088 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 7.680 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 100.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.065 INCHES MAXIMUM | | BODY LENGTH | 0.305 INCHES MAXIMUM | | BODY WIDTH | 0.350 INCHES MAXIMUM | | CUBIC MEASURE | 0.007 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 13 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.640 TOTAL NETWORK LOCATION NOT OTHERWISE SPECIFIED | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | STYLE DESIGNATOR | FLAT PACK | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 LOCATION NOT OTHERWISE SPECIFIED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.270 INCHES MINIMUM | | TERMINAL QUANTITY | 14 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 03640-6086560-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|