|
|
|
National Stock Number:
5905-01-181-1430
Federal Supply Class:
5905
National Item Identification Number:
011811430
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 85921100-17 | 27963 | GENERAL DYNAMICS INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS | | 85921100-17 | 3CYA2 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | DFP10-02-331G-S1 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 330.000 OHMS EACH RESISTOR | | IDENTICAL VALUE RESISTOR QUANTITY | 9 EACH RESISTOR | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | POWER DISSIPATION RATING IN WATTS | 0.500 TOTAL NETWORK | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | INCLOSURE METHOD | ENCAPSULATED | | STYLE DESIGNATOR | FLAT PACK | | TERMINAL TYPE | PIN | | TERMINAL QUANTITY | 10 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | CUBIC MEASURE | 0.008 CUBIC INCHES | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | BODY LENGTH | 0.240 INCHES MINIMUM AND | | 0.290 INCHES MAXIMUM | | BODY WIDTH | 0.240 INCHES MINIMUM AND | | 0.290 INCHES MAXIMUM | | BODY HEIGHT | 0.090 INCHES MAXIMUM | | TERMINAL LENGTH | 0.230 INCHES MINIMUM AND | | 0.370 INCHES MAXIMUM | | TEST DATA DOCUMENT | 27963-85921100 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|