|
|
|
National Stock Number:
5905-01-120-4643
Federal Supply Class:
5905
National Item Identification Number:
011204643
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10160241 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 159-36 | 02111 | VISHAY SPRAGUE INC | | 3167612-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3167612-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 16000.000 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 98.8 SINGLE SECTION | | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | BODY LENGTH | 0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING(S) | | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.2 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.9 TO 1.9 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.060 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.253 INCHES MINIMUM AND 0.263 INCHES MAXIMUM | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | UNDERCUT DIAMETER | 0.750 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0607 INCHES MAXIMUM |
|
|