|
|
|
National Stock Number:
5905-01-119-1395
Federal Supply Class:
5905
National Item Identification Number:
011191395
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 15774-201 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA | | WH04599 | 55578 | CTS OF WEST LIBERTY INC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 280.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 15.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 ALL SECTIONS | | BODY DIAMETER | 0.750 INCHES NOMINAL | | BODY LENGTH | 1.209 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FEATURES PROVIDED | SWITCH | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 3.25 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 3.25 INCH-OUNCES | | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | OPERATING POSITION | START OF ROTATION | | OVERALL DIAMETER | 1.030 INCHES NOMINAL | | OVERALL LENGTH | 3.224 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 1.812 INCHES NOMINAL | | SHAFT STYLE | ROUND, STEPPED | | SPECIAL FEATURES | WHITE STOP PLATES MADE OF CELENIX 3310 | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 115.0 AND 28.0 | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC/DC | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 ALL SECTIONS | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 10138-15774 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.125 INCHES NOMINAL | | UNDERCUT LENGTH | 0.437 INCHES NOMINAL |
|
|