|
|
|
National Stock Number:
5905-01-117-6073
Federal Supply Class:
5905
National Item Identification Number:
011176073
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 10219 | 33256 | SATCON ELECTRONICS CUSTOM HYBRID PRODUCTS DIV | | 144-456-0 | 73138 | BI TECHNOLOGIES CORPORATION | | 460208-08 | 07690 | BAE SYSTEMS CONTROLS INC | | HD106-130UF | 57489 | VISHAY THIN FILM LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.200 INCHES MAXIMUM | | BODY LENGTH | 0.810 INCHES MAXIMUM | | BODY WIDTH | 0.295 INCHES MAXIMUM | | CUBIC MEASURE | 0.048 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 9 EACH RESISTOR | | INCLOSURE METHOD | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.600 TOTAL NETWORK LOCATION NOT OTHERWISE SPECIFIED | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | STYLE DESIGNATOR | DUAL INLINE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 LOCATION NOT OTHERWISE SPECIFIED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -2.0 TO 2.0 LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.100 INCHES MINIMUM | | TERMINAL QUANTITY | 14 | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 07690-460208 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|