|
|
|
National Stock Number:
5905-01-116-8934
Federal Supply Class:
5905
National Item Identification Number:
011168934
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 10218 | 33256 | SATCON ELECTRONICS CUSTOM HYBRID PRODUCTS DIV | | 144-436-0 | 73138 | BI TECHNOLOGIES CORPORATION | | 460212-28 | 07690 | BAE SYSTEMS CONTROLS INC | | DIP-U1989-03-5002-F-T-2 | 11502 | INTERNATIONAL RESISTIVE COMPANY, INC. DIV WIRE AND FILM TECHNOLOGIES (WAFT) |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 50.000 KILOHMS EACH RESISTOR | | IDENTICAL VALUE RESISTOR QUANTITY | 7 EACH RESISTOR | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | POWER DISSIPATION RATING IN WATTS | 0.500 TOTAL NETWORK | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | INCLOSURE METHOD | ENCAPSULATED | | STYLE DESIGNATOR | DUAL INLINE | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL QUANTITY | 14 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -75.0 TO 75.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | BODY LENGTH | 0.690 INCHES NOMINAL | | BODY WIDTH | 0.288 INCHES NOMINAL | | BODY HEIGHT | 0.090 INCHES NOMINAL | | TERMINAL LENGTH | 0.125 INCHES MINIMUM | | TERMINAL WIDTH | 0.018 INCHES NOMINAL | | TEST DATA DOCUMENT | 07690-460212 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|