|
|
|
National Stock Number:
5905-01-115-4885
Federal Supply Class:
5905
National Item Identification Number:
011154885
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 114L15C153-T156 | 08815 | HONEYWELL INTERNATIONAL INC | | 63A104939P1 | 16331 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.875 INCHES NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 15.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 1.625 INCHES NOMINAL | | BODY LENGTH | 18.000 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/TAB/FLANGE MOUNTED | | BODY WIDTH | 1.250 INCHES NOMINAL | | FEATURES PROVIDED | HUMIDITY PROOF | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 15.000 INCHES NOMINAL | | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | 15.000 INCHES NOMINAL | | LONGITUDINAL ACTUATOR TRAVEL | 15.000 INCHES NOMINAL | | OVERALL HEIGHT | 1.625 INCHES NOMINAL | | OVERALL LENGTH | 19.688 INCHES MAXIMUM | | MOUNTING FACILITY QUANTITY | 4 | | MOUNTING SLOT WIDTH | 0.219 INCHES NOMINAL | | MOUNTING METHOD | SLOT | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 1.000 INCHES NOMINAL | | SHAFT STYLE | ROUND, THREADED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE | | TEST DATA DOCUMENT | 16331-63A104939 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD LENGTH | 0.938 INCHES NOMINAL |
|
|