|
|
|
National Stock Number:
5905-01-114-6986
Federal Supply Class:
5905
National Item Identification Number:
011146986
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| MIL-R-39035/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJR28FP103M | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJR28FP103P | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| OVERALL LENGTH | 0.600 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39035/5 GOVERNMENT SPECIFICATION | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.400 INCHES NOMINAL | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | BODY LENGTH | 0.500 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.3 FREE AIR SINGLE SECTION | | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | RELIABILITY INDICATOR | ESTABLISHED | | BODY STYLE | RECTANGULAR | | TEST DATA DOCUMENT | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | OVERALL WIDTH | 0.100 INCHES NOMINAL | | CUBIC MEASURE | 0.009 CUBIC INCHES | | SHAFT LENGTH | 0.090 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | OVERALL HEIGHT | 0.370 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | MOUNTING METHOD | TERMINAL | | BODY WIDTH | 0.100 INCHES NOMINAL | | FRAGILITY FACTOR | MODERATELY RUGGED | | BODY HEIGHT | 0.170 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1800.0 MINIMUM AND 5400.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1800.0 MINIMUM AND 5400.0 MAXIMUM | | SHAFT DIAMETER | 0.080 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | TERMINAL LENGTH | 0.200 INCHES NOMINAL |
|
|