|
|
|
National Stock Number:
5905-01-113-4525
Federal Supply Class:
5905
National Item Identification Number:
011134525
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 12568 | 04454 | SENSOR SYSTEMS, L.L.C. | | 58FL2-101 | 08815 | HONEYWELL INTERNATIONAL INC | | PC70065-2 | 09344 | ROCKWELL COLLINS, INC. DBA RC DISPLAYS SYSTEMS |
|
Techincal Specification:
| ACTUATOR TYPE | DUAL CONCENTRIC | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS | | BEARING TYPE | BEARING SHAFT | | BODY DIAMETER | 0.625 INCHES MAXIMUM | | BODY LENGTH | 1.500 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 270.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 11.0 KILOHMS 2ND SECTION | | ELECTRICAL RESISTANCE PER SECTION | 5.5 KILOHMS 1ST SECTION | | FRAGILITY FACTOR | RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS | | LATERAL RUNOUT | 0.002 INCHES | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 18.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 | | MOUNTING BUSHING LENGTH | 0.312 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.250 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.249 INCHES NOMINAL | | SHAFT LENGTH | 1.500 INCHES NOMINAL | | SHAFT END PLAY | 0.005 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.002 INCHES | | SHAFT STYLE | ROUND, STEPPED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TEST DATA DOCUMENT | 09344-PC70065 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.124 INCHES NOMINAL | | UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
|
|