|
|
|
National Stock Number:
5905-01-112-7456
Federal Supply Class:
5905
National Item Identification Number:
011127456
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 116WS-330 | 08815 | HONEYWELL INTERNATIONAL INC | | P12934-004-01 | 02111 | VISHAY SPRAGUE INC | | P12934-004-01 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 358.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 SINGLE SECTION | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 1.065 INCHES MAXIMUM | | BODY LENGTH | 0.650 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | HUMIDITY PROOF | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 SINGLE SECTION | | LATERAL RUNOUT | 0.002 INCHES | | OVERALL DIAMETER | 1.338 INCHES MAXIMUM | | OVERALL LENGTH | 0.995 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0670 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.0650 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING(S) | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | PILOT DIAMETER | 1.0000 INCHES MAXIMUM | | PILOT LENGTH | 0.0670 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT END PLAY | 0.005 INCHES | | SHAFT DIAMETER | 0.1249 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.002 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.512 INCHES MAXIMUM | | UNDERCUT DIAMETER | 1.000 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0670 INCHES MAXIMUM | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | TEST DATA DOCUMENT | 18876-+12934-004 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|