|
|
|
National Stock Number:
5905-01-108-5410
Federal Supply Class:
5905
National Item Identification Number:
011085410
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 582-137 | 11236 | CTS CORP BERNE DIV THICK FILM PRODUCTS GROUP | | 6133942-1 | 03640 | LOCKHEED MARTIN CORPORATION | | 6133942-1 | 17826 | TECHNO COMPONENTS CORP DBA TECHNO COMPONENTS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 15.000 KILOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.125 INCHES MAXIMUM | | BODY LENGTH | 0.860 INCHES MAXIMUM | | BODY WIDTH | 0.250 INCHES NOMINAL | | IDENTICAL VALUE RESISTOR QUANTITY | 8 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.800 TOTAL NETWORK LOCATION NOT OTHERWISE SPECIFIED | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | DUAL INLINE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 LOCATION NOT OTHERWISE SPECIFIED | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.150 INCHES MINIMUM AND 0.215 INCHES MAXIMUM | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.023 INCHES MAXIMUM | | TEST DATA DOCUMENT | 03640-6133942 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|