|
|
|
National Stock Number:
5905-01-103-7529
Federal Supply Class:
5905
National Item Identification Number:
011037529
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| MIL-R-18546/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RE75GR220 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | W4834-002LZ | S3092 | RHEINMETALL AIR DEFENCE AG | | W4834-002LZ | S3118 | OERLIKON-BUEHRLE AG WERKZEUGMASCHINENFABRIK |
|
Techincal Specification:
| UNPACKAGED UNIT WEIGHT | 32.0 GRAMS | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-18546/1 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-R-18546 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | CUBIC MEASURE | 1.032 CUBIC INCHES | | TERMINAL WIDTH | 0.140 INCHES MINIMUM | | TERMINAL LENGTH | 0.376 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TERMINAL TYPE | TAB, SOLDER LUG | | MOUNTING HOLE SIZE | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.552 INCHES MINIMUM AND | | 1.572 INCHES MAXIMUM | | BODY HEIGHT | 0.594 INCHES MINIMUM AND | | 0.656 INCHES MAXIMUM | | BODY WIDTH | 0.532 INCHES MINIMUM AND | | 0.656 INCHES MAXIMUM | | BODY LENGTH | 1.876 INCHES MINIMUM AND | | 2.000 INCHES MAXIMUM | | STYLE DESIGNATOR | AXIAL TERMINAL (S) | | INCLOSURE METHOD | ENCASED | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | ELECTRICAL RESISTANCE | 0.220 OHMS | | SPEC/STD CONTROLLING DATA | | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-R-18546/1 | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RE75GR220 |
|
|